Global One Construction Solutions LLC

XYPEX CONCENTRATE

Be the first to review this product

Availability: In Stock

Xypex Concentrate consists of Portland cement, finely graded sand and active proprietary chemicals.

Xypex is a unique chemical treatment for the waterproofing, protection and repair of concrete. It is applied as a cementitious slurry to the pre-saturated surface of existing above and belowgrade structures. The active chemicals diffuse into the substrate and react with moisture and the constituents of hardened concrete to cause a catalytic reaction. This reaction generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete, as well as cracks, permanently sealing the concrete and preventing the penetration of water and other liquids from any direction, even under high hydrostatic pressure. Xypex Concentrate is also mixed in a Dry-Pac form for sealing strips at construction joints, or for the repairing of leaking cracks, faulty construction joints and other defects.

Recommended for:
  • Reservoirs
  • Sewage and Water Treatment Plants
  • Underground Vaults
  • Secondary Containment Structures
  • Foundations
  • Tunnels and Subway Systems
  • Swimming Pools
  • Parking Structures

Advantages

  • Resists extreme hydrostatic pressure
  • Becomes an integral part of the substrate
  • Can seal static hairline cracks up to 0.4 mm
  • Can be applied to the positive or the negative side of the concrete surface
  • Allows concrete to breathe
  • Highlyresistant to aggressive chemicals
  • Non-toxic / noVOCs
  • Does not require a dry surface
  • Cannot puncture, tear or come apart at the seams
  • No costly surface priming or leveling prior to application
  • Does not require sealing, lapping and finishing of seams at corners, edges or between membranes
  • Does not require protection during backfilling or during placement of steel, wire mesh or other materials
  • Less costly to apply than most other methods
  • Not subject to deterioration
  • Permanent
  • Available in white for enhanced illumination

Coverage

  • For normal surface conditions, the coverage rate for each Xypex coat is 6 to 7.2 sq. ft./lb. (1.25 – 1.5 lb./sq. yd. or 0.65 – 0.8 kg/m2).

Certification

Xypex Concentrate satisfies the requirements of EN 1504-2; Initial Type Testing (ITT) according to EN 1504-2 was certified by BSI as the Notifying Body.

Potable Water Exposure

NSF 61, “Drinking Water System Component-Health Effects”, NSF International, Ann Arbor, USA
Exposure testing of potable water in contact with Xypextreated samples indicated no harmful effects.

Additional Documents

  • Product Data Sheet
  • SDS